Ningbo concrete mirror curing floor technology
Concrete sealant is a kind of easy construction, colorless liquid shape, relying on its internal chemical reaction with concrete to achieve the function of increasing hardness and dust prevention. Compared with untreated concrete, concrete will further improve the wear resistance and chemical resistance, make it more durable. By penetrating the concrete surface, the resulting chemical effect will fill up some pores in the concrete, which will further increase its strength and wear resistance. In addition, it can also achieve the dustproof effect, easy to clean.
It meets the VOC limited 400G / L standard, meets the US EPA Building Coating Code, and is also recognized by the US USDA.
Product application
It can be applied in any required environment of pair strength, dust and chemical resistance and increased wear. Ideal applications include factories and warehouses, underground storage rooms, sewage workshops, chemical treatment equipment, refining and heavy-load transportation areas, such as: downtown, sports venues, hospitals, airports and museums. The LIQUI-HARD can be constructed together with the wear-resistant ground.
Induroshine system uses green technology, using polishing technology, can make the ground to the shiny surface, please contact our technical personnel.
Product features
Go deep into the concrete surface to increase the hardness and achieve moisture resistance.
Dust prevention and improved chemical resistance, especially oil erosion
Provides a long-lasting, effective shine
Prevent abrasions and shedding
Yellow color is not caused by long walking or traffic, and decolorization and provides a hard protection on the surface.
Improve surface gloss
Easy construction
Meet the VOC requirements. The VOC capacity is 0G / L.
Can help architects win the LEED points for their applications in green buildings.
fraction of coverage
Surface Type square ft / gallon m 2 / L
* New Ground Level 300 7.36
Old Ground, 200 4.91
* As a curing use can only be used in new concrete.
Note: The coverage rate varies according to the concrete surface and the void.
pack
5 Gallon (18.93L) barrel
55 Gallon (208.20L) barrel
be in the process of construction
Base level treatment... New concrete: The LIQUI-HARD can be applied after polishing on the new concrete floor. Old concrete: Before use, the surface needs to be thoroughly cleaned, leaving all the residue, oil, sealants, pollutants and grout. Can be used to clean the ground. Fill and repair all the holes, the cracks.
To achieve good results, MED-CURE fast drying agent is used after construction. It takes three days to follow the existing ground treatment method.
Mix... For optimal performance, mixing or stirring is recommended.
Construction method... New concrete: Undiluted, at about 300 square ft / gallon (4.91 m 2 / l), use low pressure spray or mane brush to avoid cloudy material, and no other work for new concrete.
Old concrete: spray, rubber broom or mop can be used to soak the concrete surface. Then keep the surface wet for at least thirty minutes (and control the range of 30-60 minutes, depending on the temperature and conditions.) Note: Note the porous or dry areas that must be maintained when use